Ways to Keep Your Car Cool on Hot Days

The interior of your car can heat up to dangerous temperatures making driving almost unbearable at the peak of summer. Even though not everyone has the luxury of an air conditioner, there are still few things that you can do to keep you and your children as well as your pets from the heat of the sun. 


    Find Shaded Parking 

If your car is parked in direct sunlight, you will surely not like to enter it. Take time to find building, underground parking lots or even just a spot under trees to provide shade. Open all doors for a couple of minutes before entering if your car has been parked in direct sunlight for a long time.  

It is important to get the hot air out because glass windows insulate heat inside. You can also allow hot air to escape by leaving the windows slightly open while parked. The opening must be not more than the width of a person’s arm so no other person can get into your car. 

Purchase window vent visors that attach to the top of the car’s window if security is a concern. You can also put window tinting and visor so people will have a hard time figuring out if your windows are open or not. If you do not know how to put tint in your windows and visor then you can hire professionals such as Bismarck window tinting services. 

    Use Sun Shade and a Blanket 

It is a great investment for those who cannot escape parking outdoors on hot days to purchase a sun shade or UV heat shield. Sun shades protect the car’s interior from harmful sun rays that penetrate windshields and reduce interior temperature.  

Look into spending a little more and purchasing a custom made sun shade online to cover the entire windshield if you live in places with months of hot summer. Virtually no light and UV rays can get it since you windshield will fit like a glove. 

    Use Bottom Vents 

To immediately cool their upper body, most people who enter a hot vehicle open the windows right away. The best method is to push the hot air out from the bottom to cool the vehicle as quickly as possible since heat rises. So the only bottoms vents close to the ground are functioning, adjust the fan setting to max and close the upper vents. 

The stale hot air escapes through the open window by pushing the air from the bottom to the top. Switch to the upper vents to stay cool while driving once the hot air is pushed out.  

    Toggle A/C Settings 

Make sure that you set it to fresh air and not recirculation when you first enter your vehicle if you are lucky enough to have air conditioning. This works best once the vehicle has reached its desired temperature because recirculation draws in the interior air and typically works best. 

To prevent carbon monoxide emissions from other vehicles being pulled into your car, set your air conditioner to recirculation. Get into the habit of switching fresh air when first use your air conditioner and then switch to recirculation after 10 minutes.

Read More

Ways to Maintain Your Security System 

To make sure it functions optimally, a security system needs regular maintenance and this involves changing the batteries when needed, inspecting the individual components, and ensuring all individual parts communicate effectively with one another. You must also conduct your own weekly and monthly inspection while you track the performance of your system.

Security System

Maintaining the security of your home is crucial, so to help you maintain your security system, here are some ways that can help you. 

    Weekly Perimeter Checks 

To inspect the locks on all doors and windows, walk around your home every week. It is also important that you inspect the frame around each door as well as the window and ensure that there is no rotting, warping or any other condition that makes it easy for outsiders to breach in. 

Rusty metal frames around your house can be used as an entrance so it is crucial that you repair or exchange it, it is advisable to weld metal frames to keep it strong. However, if you do not know how to use a welding machine, you can hire professionals such as Mobile welder Phoenix that offers high-quality services and guarantees customer satisfaction. 

The sensors need re-fastening occasionally since adhesive usually holds them. The batteries require testing and occasional changing because wireless sensors are battery-powered. 

    Test the Control Panel 

The brain of your entire security system is your control panel because every signal of a sensor passes through it and deciphers those signals to know when to activate. It runs a self-diagnostic to ensure everything works by undergoing a test mode on its panel.  Notify before running the test mode unless your specific system doesn’t require it if you use a monitoring device.  

If an alarm activates while on a test, this prevents the monitoring service from sending police. Look for a loose wire or any signs of damage as well as visually inspect the panel. If the panel starts malfunctioning or shows signs of wear, notify your alarm company immediately.  

    Examine Your Lights 

To ensure all the lights work properly and have functional light bulbs, check your entire exterior lighting monthly. Lights are not aimed properly since the wind sometimes causes security lighting to shift slightly. To maximize their effectiveness, readjust lights as needed. 

    Inspect All Cameras 

Examine daily to make sure they have power, are aimed properly and have not been vandalized if you have cameras included in your system. Verify each if it is getting an image and is recording appropriately by checking and monitoring recording devices.  

    Request Annual Inspections 

An annual inspection from a qualified technician will help you to ensure that everything stays running optimally for years to come aside from your own checks. Software that needs updates can be done by your inspector and this happens sometimes through the main control panel. 

    Perform Additional Safety Checks 

With one of them in the kitchen, keep a fire extinguisher on every level of a home. Get them serviced and inspect the gauge on these extinguishers.  Every month, review safety procedures with any children in the house. Emphasize the safety rules and regulations in your home. 

Read More

Historical Carpet Stain Removal


We are all very busy in our individual lives outside of the four corners of our home and we forget things that we should be doing inside our home because of how occupied we are in the things that we should be doing in the outside world. Sad as it may seem but this is surely true to the bones. One common example that you could relate to is the stains on your carpet that you have failed to remove on the day that it happened because you are running late for an appointment or you are having a hard time dealing with your kids and you just don’t have time to do so.

Carpet Stain Removal

Stains are best removed at the time when it happened because you do not want a stain to stay on your carpet for long. But because we understand your sentiments about your time and efforts, we made this article that is surely for those people who have old stains lying around their carpet. You are going to read some advice and tips if you continue scrolling down below for more. We are hoping that we could still be with you up until the end of this article. 

We highly recommend you to use solvents and/or solutions that could greatly affect the stain in your carpet and cause it to disappear from your precious carpet. They are made to remove stains and it works for stains that have been lying around for some time in your carpet. 

If you do not know by now, hydrogen peroxide is widely used in order to remove stains that have been in your carpet for long. This chemical is so effective in doing so and this is why a lot of people stay faithful to it. It is also very cheap and affordable which is always a good thing. In just a single dollar, you could buy a bottle of hydrogen peroxide and you could use this to remove those nasty stains that are on your carpet. What you need to do with it is to get an old spray bottle, it may be from your old perfume or other products so long as it has a nozzle that could spray liquid elements and then put the hydrogen peroxide on the bottle and spray it on the stain and let it sit untouched for ten minutes. Then, get a brush that is hard (probably a steel brush) so that you could brush the stain off from your carpet. Let the wet area from the hydrogen peroxide air dry on that part of your carpet. Do not allow traffic on that part until it is completely dry. 

But, if you think that the stain in your carpet could not be eliminated by using mixtures then you have to call for help from the professionals. There are a number of carpet cleaning companies that are reliable as of today like carpet cleaning spring hill or others that are near you.  Be sure that you hire the company that you truly trust. 

Read More

Recent Comments